Southern Trails Elite Series Saddle
Southern Trails Saddle is Proud to offer the " Elite Series " Custom Western Saddles

Each Saddle is Hand Crafted by a Saddle Maker with over 28 Years Experience - Customizations Welcome

Painstaking Effort to Detail can be seen in Every Western Saddle We Offer, Only Premium Leather is Used

Seats are Custom Ground for Standard or Narrow Fit - Many other Custom Changes can be ordered or made

Manufacturing Time is Approximately 9
-10 Weeks depending on Model and Tree Needed - Call for Details
B-5700 Barrel Racing Saddle   ----   B-5600 Exotic Barrel Saddle
Tree: Barrel Racer, Custom Rawhide Covered Wood.  The ground work is hand shaped using skirting leather over a 20 gauge strainer.
Seat: 14", 15",16", 17"
Weight: Approximately 28 lbs.
Gullet Width: 6 ½" SQH, 6.75", RQH, 7" FQH - Gullet Height: 8"
Swell: CJ Fork; Width 12 ½".
Skirts: Length 25 ½" (on 15"seat); Width 10 ½", lined with wool shearling, 1" density.
Cantle: Height 4";  Width  12 ½"; Dish 1 ¾"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 3 ½", Diameter 1 ¾" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of
the fenders
Stirrups: Off-set Aluminum
Rigging: In-skirt, 7/8’s position, 2 ½"  recessed beveled stainless steel dees in rear.
Leather: 13-15 oz. Thoroughbred Golden Skirting.
Trim: Berry Conchos with crystals. All Hardware including the saddle screws and washers is Stainless Steel.  The bicycle style padded
seat is constructed with 3/8" close cell foam covered with your choice of exotic hides. We use the Union Lockstitch to sew and pull the
277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Exotic Barrel Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather
Conditioner.

Special Price $ 2,
095.00  # B-5700 or # B-5600 ---------  Note: Other Color Oils Available, Other Seat Styles Choices Avail.
Click on Pic to Enlarge
Click on Pic to Enlarge
Click on Pic to Enlarge
Click on Pic to Enlarge
C-4000 Ranch Cutting Saddle
Tree: Custom Ranch Cutter, Rawhide Covered Wood and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 16" and 17".
Weight: Approximately 45 lbs.
Gullet Width: 6 ¾" Quarter Horse Arizona Bars
Gullet Height: 7 ½"
Swell: Buster Welch; Width 13"
Skirts: Length 28"; Width 14 ½", lined with genuine bark tan  1" thick wool shearlings, 1" density.
Cantle: Height 3 ½"  Width  12"; Dish 1 ¼"; Style 1 ¾" Cheyenne Roll, Hand Sewn, 5 stitches to the inch, 5 cord flax thread.
Horn: Height 3 ½", Diameter 1 ¾", leather covered, hand sewn.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound leather covered, machine sewn bell stirrups with 3" treads.
Rigging: Double dee rigging in 7/8’s position. Hardware is Stainless Steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Walnut Skirting.
Trim: Hansen Western Gear’s Tempe Sterling Silver Overlay Conchos. All Hardware including the saddle screws and washers is stainless steel.  Saddle strings
cut from premium 7-8 oz. burgundy latigo. We use the Union Lockstitch to sew and pull the 346 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Ranch Cutter first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnished by hand rubbing.
Tooling: Hand carved floral with Carlos Border. - Other Styles Available

Special Price $ 2,
695.00    # C-4000          Note: Other Oils Available
C-4100 Ranch Cutting Saddle
Tree: Ranch Cutter, Wood covered Rawhide covered and rawhide laced.  The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer.
Seat Size: Available in 16" and 17"
Weight: Approximately 45 lbs.
Gullet Width: 6 ¾" Quarter Horse Arizona Bars
Gullet Height: 7 ½"
Swell: Buster Welch; Width 13"
Skirts: Length 28"; Width 14 ½", lined with genuine bark tan  1" thick wool shearlings, 1" density.
Cantle: Height 3 ½"  Width  12”; Dish 1 ¼”; Style 1 ¾” Cheyenne Roll, Hand Sewn, 5 stitches to the inch, 5 cord flax thread.
Horn: Height 3 ½”, Diameter 1 ¾", leather covered, hand sewn.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden bell stirrups with 3" hand laced leather treads.
Rigging: Double dee rigging in 7/8’s position. Hardware is Stainless Steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Golden Skirting.
Trim:  Hansen Western Gear’s Kansas silver plate conchos. All Hardware including the saddle screws and washers is stainless steel.  Saddle strings cut from
premium 7-8 oz. burgundy latigo. We use the Union Lockstitch to sew and pull the 346 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Ranch Cutter first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnished by hand rubbing.
Tooling: Hand carved Oak Leaf and Vertical Basketweave with Shell Border.

Special Price $ 2,
595.00         # C-4100              Note: Other Oils Available
M-3000 Old Fashioned Cowboy Saddle, Many use it for Trails and a Mounted Shooting Saddle - Round Skirt Available
Tree: Custom Tree. Rawhide Covered Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 14", 15 " and 16".
Weight: Approximately 40 lbs.
Gullet Width: 6 ¾" QH BArs
Gullet Height: 8 ½"
Swell: Round Fork; Width 12".
Skirts: Length 27" (on 16"seat); Width 12 ½", lined with faux shearling, 90% wool.
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style ½" Pencil Roll, Hand Sewn.
Horn: Height 3 1/4", Diameter 2 1/4" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Wooden 3" Bell
Rigging: Sam Stagg in 7/8's position, leather covered stainless steel dees. Rigged with four 1 ¾" tie straps.
Leather: Premium 13-15 oz. Thoroughbred Walnut Skirting.
Trim: All Hardware including the saddle screws and washers is Stainless Steel.  Saddle strings on this eight string set hang 36" from the rear button, 18" from the
seat buttons, and 24" from the front button.  We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Mounted Shooter Saddle first receives several warm coats of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Running W border.
Style: A unique combination of period styling and today's comfort allow us to offer you a saddle with the authentic look you're after and yet have the feel of a
competition saddle.

Special Price $ 2,
095.00    # M-3000       Other Oil Colors Available
Click on Pic to Enlarge
Click on Pic to Enlarge
Comfort Series Trail Saddle
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge
saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc., some at extra cost
Weight: Approximately 29 lbs.
Gullet Height: 8"
Swell: A-Fork; Width 10".
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless Steel.  
Saddle strings cut from premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered
with 4-5 oz. chap leather. We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each  Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Border Tooled with stems and turnbacks.

Special Price $ 1,
695.00     # T-9000
Click on Pic to Enlarge
Natural Ride T-3800
Tree: Natural Ride Trail Tree, Custom Fiberglass Covered Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Weight: Approximately 29 lbs.
Gullet Width: 7" Full QH Bars --- Others Available, Gaited, Mule, QH
Gullet Height: 8"
Swell: A-Fork; Width 10".
Skirts: Length 26" (on 16" seat); Width 13 ½" at front and 9" at rear, lined with faux shearling, 90% wool.
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style 1 ½" Natural Rawhide Covered Pencil Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders.
Rigging: Horseshoe Brand Flat Plate in-skirt, 7/8’s position, 2 ½" beveled stainless steel dees in rear.
Flank Cincha: 3" tapering to 1 ¾"; burgundy latigo lined with stainless steel roller buckles.
Leather: 13-15 oz. Mahogany Skirting.
Trim:  All Hardware including the saddle screws and washers is stainless steel.  Saddle strings cut from premium 5-7 oz. Burgandy latigo. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Edges are burnished by hand rubbing.
Tooling: Carlos Border.

Special Price $ 1,
795.00        # T-3800           
Click on Pic to Enlarge
Roughout Wade W-3700
Tree: Wade Tree Saddle, Custom Fiberglass Covered Wood, The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16".
Weight: Approximately 38 lbs.
Gullet Width: 7" Full Quarter Horse  Bars - Other Available
Gullet Height: 7 ¾"
Swell: Wade Fork; Width 11"
Skirts: Length 27"; Width 12 ½", lined with genuine bark tan  1" thick wool shearlings, 1" density.
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style 1 ½" Natural Rawhide Pencil Roll, Hand Sewn.
Horn: Height 2", Diameter 4 ¾", capped and wrapped, natural rawhide tipped, hand sewn with mule hide wrap.
Stirrup Leathers: 3" with leather covered Blevins Buckles. Nevada twist with burgundy latigo wrap.
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Horseshoe Brand Flat Plate dropped in-skirt, 7/8’s position, 2 ½" beveled stainless steel dees in rear.
Flank Cincha: 3" tapering to 1 ¾"; burgundy latigo lined with stainless steel roller buckles.
Leather: 13-15 oz. Thoroughbred Golden rough side out, buffed.
Trim:  All Hardware including the saddle screws and washers is stainless steel.  Saddle strings cut from premium 5-7 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 346 white nylon thread tight at 4 ½ stitches to the inch.
Finish: Each Rough Out Wade first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner
Edges are burnished by hand rubbing.

Special Price $ 2,
495.00   # W-3700                    Bucking Rolls can be left off
Click on Pic to Enlarge
Click on Pic to Enlarge
Click on Pic to Enlarge
Wade # W-3500
Tree: Wade Tree Saddle, Custom Fiberglass Covered Wood,  The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16".
Bars: Full Quarter Horse Arizona Bars
Weight: Approximately 38 lbs.
Gullet Width: 7"
Gullet Height: 7 ¾"
Swell: Wade Fork; Width 11"
Skirts: Length 27"; Width 11 ½", lined with genuine bark tan  1" thick wool shearlings, 1” density.
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style 1 ½" Natural Rawhide Pencil Roll, Hand Sewn.
Horn: Height 2", Diameter 4 ¾", capped and wrapped, natural rawhide tipped, hand sewn with mule hide wrap.
Stirrup Leathers: 3" with leather covered Blevins Buckles. Nevada twist with burgundy latigo wrap.
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Horseshoe Brand Flat Plate dropped in-skirt, 7/8’s position, 2 ½" beveled stainless steel dees in rear.
Flank Cincha: 3" tapering to 1 ¾"; burgundy latigo lined with stainless steel roller buckles.
Leather: 13-15 oz. Premium Thoroughbred Mahogany Skirting.
Trim:  All Hardware including the saddle screws and washers is stainless steel.  Saddle strings cut from premium 5-7 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 346 white nylon thread tight at 4 ½ stitches to the inch.
Finish: Each Wade Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.  Edges are
burnished by hand rubbing.
Tooling: Floral with Carlos Border.

Special Price $
2,995.00         # W-3500                Bucking Rolls can be left off
Elite Wade W-3600
Tree: Wade Ranch Tree, Custom Fiberglass Covered Wood, The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16".
Weight: Approximately 39 lbs.
Gullet Width: 7" Full QH Bars -- Other Available
Gullet Height: 7 ¾"
Swell: Wade Fork; Width 11"
Skirts: Length 27"; Width 11 ½", lined with genuine bark tan  1" thick wool shearlings, 1" density.
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style 1 ½" Natural Rawhide Pencil Roll, Hand Sewn.
Horn: Height 2", Diameter 4 ¾", capped and wrapped, natural rawhide tipped, hand sewn with mule hide wrap.
Stirrup Leathers: Exposed 3" with leather covered Blevins Buckles and oak leaf & acorn hand tooling. Nevada twist with burgundy latigo wrap.
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Mahogany Skirting.
Trim:  All Hardware including the saddle screws and washers is stainless steel.  Saddle strings cut from premium 5-7 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 346 white nylon thread tight at 4 ½ stitches to the inch.
Finish: Each Wade Rancher first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnished by hand rubbing.
Tooling: Hand carved Oak Leaf and Acorn with Carlos Border.

Special Price $ 3,195.00        # W-3600              Bucking Rolls can be left off
Click on Pic to Enlarge
R-2200 Roping Saddle
Tree: Working Roper, Custom Fiberglass Covered Wood  The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 14", 15, and 16" (half sizes available on special order).
Weight: Approximately 40 lbs.
Gullet Width: 6.75" Quarter Hose Bars - Others Available
Gullet Height: 7 ½"
Swell: Roper with leg cut; Width 12 ½"
Skirts: Length 27"; Width 13 ½", lined with faux shearling, 90% wool.
Cantle: Height 3 ½"  Width  12”; Dish 1 ¼”; Style 1 ¾” Cheyenne Roll, Hand Sewn.
Horn: Height 3 ½”, Diameter 2 ½", leather covered, hand sewn.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Leather covered wooden deep roper stirrups with hand laced leather treads.
Rigging: Double dee rigging in 7/8’s position. Hardware is Stainless Steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Golden Skirting.
Trim:  Antique finish Texas Star conchos. All Hardware including the saddle screws and washers is stainless steel.  We use the Union Lockstitch to sew and
pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each  Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are burnished by
hand rubbing and died dark brown.
Tooling: 5/8" Horseshoe Brand geometric block with seed and Running W Border.

Special Price $ 2,
095.00              # R-2200
Click on Pic to Enlarge
T-9215 Secure Trail Hard Seat
Tree: Custom Swept Back Swell. . The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15, 16 and 17"
Weight: Approximately 32 lbs.
Gullet Width: 6.5, 6.75, 7.0, 7.25 and 7.5"
Gullet Height: 7 ½"
Swell: Swept Back 13.5"
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 5";  Width  13"; Dish 1 ½"; Style 1 ½" Pencil Roll
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden with Tapedoros
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless Steel.  Saddle strings cut from
premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each  Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Border Tooled with stems and turnbacks.

Special Price $ 2,
295.00        T-9215
Click on Pic to Enlarge
Tree: Ranch Working Roper, rawhide covered and rawhide laced,  The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16".
Weight: Approximately 40 lbs.
Gullet Width: 6.75" QH Bars - Others Available
Gullet Height: 7 ¼"
Swell:  Width 12 ½"
Skirts: Length 27 ½"; Width 13", lined with genuine bark tan 1" thick wool shearling, 1" density.
Cantle: Height 4"  Width  12 ½"; Dish 1 ½"; Style 1 ¾" Natural Rawhide Covered  1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 3 ½", Diameter 2 ½", rawhide tipped, leather covered.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Double Dee rigging in 7/8’s position. Hardware is stainless steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Walnut Skirting.
Trim: All Hardware including the saddle screws and washers is stainless steel.  Saddle strings cut from premium 7-8 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Ranch Roper receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are burnished by
hand rubbing.
Tooling: Hand carved floral and Hamley swirl with lined petal border.

Special Price $ 2,
295.00      # R-8300
Click on Pic to Enlarge
C-4200 Ranch Cutter
Tree:  Ranch Cutter, Custom Batie Rawhide covered and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 16" and 17".
Weight: Approximately 45 lbs.
Gullet Width: 6 ¾" QH Bars
Gullet Height: 7 ½"
Swell: Buster Welch; Width 13"
Skirts: Length 28"; Width 14 ½", lined with faux shearling, 90% wool.
Cantle: Height 3 ½"  Width  12"; Dish 1 ¼"; Style 1 ¾" Cheyenne Roll, Hand Sewn.
Horn: Height 3 ½", Diameter 1 ¾", leather covered, hand sewn.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Double dee rigging in 7/8’s position. Hardware is Stainless Steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Golden Skirting.
Trim: Horseshoe Brand Floral Slotted  Conchos with black accents. All Hardware including the saddle screws and washers is stainless steel.  Saddle strings
cut from premium 7-8 oz. burgundy latigo. We use the Union Lockstitch to sew and pull the 346 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Ranch Cutter first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnished by hand rubbing.
Tooling: Hand carved floral and Hamley swirl with lined petal border.

Special Price $ 2,
495.00         # C-4200
Click on Pic to Enlarge
R-8200 Ranch Roping Saddle
Tree: Working Ranch Saddle, Batie Rawhide covered and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16".
Weight: Approximately 40 lbs.
Gullet Width: 6.75" Quarter Horse Bars
Gullet Height: 7 ¼"
Swell:  Width 12 ½"
Skirts: Length 27 ½"; Width 12", lined with genuine bark tan 1" thick wool shearling, 1" density.
Cantle: Height 4"  Width  12 ½"; Dish 1 ½"; Style ½" Natural Rawhide Covered Pencil Roll, Hand Sewn.
Horn: Height 3 ½", Diameter 2 ½", rawhide tipped, leather covered, hand sewn with mule hide horn wrap.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Premium Thoroughbred Walnut Skirting.
Trim: All Hardware including the saddle screws and washers is stainless steel.  Saddle strings cut from premium 7-8 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Working Rancher receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are burnished
by hand rubbing.
Tooling: Hand carved floral and Hamley swirl with lined petal border.

Special Price $ 2,
195.00     # R-8200
Click on Pic to Enlarge
Click on Pic to Enlarge
Click on Pic to Enlarge
A-Fork Wade Style Hard Seat Trails and Roping Saddle # R-8006
Tree: Fiberglas Reinforced Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16"
Gullet Width: 6.75" Quarter Horse Bars - Other Available
Gullet Height: 7 3/4"
Swell:  Width 10 ½"
Skirts: Length 26 ½"; Width 12", lined with faux shearling, 90% wool.
Cantle: Height 4"  Width  12 ½"; Dish 1 ½"; Style ½" Natural Rawhide Covered Pencil Roll, Hand Sewn.
Horn: Height 3", Diameter 3", rawhide tipped, leather covered, hand sewn with mule hide horn wrap.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Flank Cincha: 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 13-15 oz. Premium Thoroughbred Walnut Skirting.
Trim: All Hardware including the saddle screws and washers is stainless steel.  Saddle strings cut from premium 7-8 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Saddle receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are burnished by hand
rubbing.
Tooling: Hand Tooled Basket with Barbed Wire Border

Special Price $ 2,
195.00     # R-8006
Comfort Series Premium Trail Saddle
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc., some at extra cost
Weight: Approximately 32 lbs.
Gullet Height: 7.5"
Swell: Width 12.5"
Skirts: Length 26.5" (on 16” seat), lined with faux shearling, 90% wool. Skirts are Close Contact Design             
Cantle: Height 3.5";  Width  13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand sewn and tooled stirrups with 3" treads.
Rigging: Dropped Dee in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Cross Conchos, All Hardware including the saddle screws and washers is Stainless Steel. The padded seat is constructed with 3/8" close cell foam
covered with 4-5 oz. chap leather. We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Fully Hand Engraved on Shirts, Housing, Stirrups, Cantle and Pommel

Special Price $ 2,
195.00     # T-5008                                                                                    
B-5400 Barrel Saddle
Tree: Steele Saddle Tree LLC. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer (tin seat).
Seat Size: Available in 14 ½", and 15 ½".
Bars: Quarter Horse Bars
Weight: Approximately 28 lbs.
Gullet Width: 6 ½"
Gullet Height: 7 ½"
Swell: Round Fork; Width 12".
Skirts: Length 25" (on 15 ½"seat), 24” on 14 ½" seat; Width 10 ½", lined with faux shearling, 90% wool.
Cantle: Height 4";  Width  11 ¼"; Dish 1 ¼"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 3 ¾", Diameter 1 ¾" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Off-set Aluminum
Rigging: Stainless Steel C-rigging in-skirt, 7/8’s position, billet access slots in rear.
Leather: 13-15 oz. Thoroughbred Golden Skirting.
Trim: Antique Ranger Star conchos. All Hardware is Stainless Steel. The bicycle style padded seat is constructed with 3/8" close cell foam covered with chocolate
or black suede. We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Working Class Barrel Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Floral with basket stamp and Running W border.

Special Price $ 1,
695.00       # B-5400
Click on Pic to Enlarge
M-3100 Old Fashined Cowboy Saddle, Many use it for Trails and Mounted Shooting - Round Skirt
Tree: Custom Tree. Rawhide Covered Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 14", 15 " and 16".
Bars: Reg. QH, Full QH
Weight: Approximately 40 lbs.
Gullet Width: 6 ¾" QH BArs
Gullet Height: 8 ½"
Swell: Round Fork; Width 12".
Skirts: Length 27" (on 16"seat); Width 12 ½", lined with faux shearling, 90% wool.
Horn: Height 3 1/4", Diameter 2 1/4" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Wooden 3" Bell
Rigging: Sam Stagg in 7/8's position, leather covered stainless steel dees. Rigged with four 1 ¾" tie straps.
Leather: Premium 13-15 oz. Thoroughbred Walnut Skirting.
Trim: All Hardware including the saddle screws and washers is Stainless Steel.  Saddle strings on this eight string set hang 36" from the rear button, 18" from the
seat buttons, and 24" from the front button.  We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Mounted Shooter Saddle first receives several warm coats of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Running W border.
Style: A unique combination of period styling and today's comfort allow us to offer you a saddle with the authentic look you're after and yet have the feel of a
competition saddle.

Special Price $ 2,
095.00    # M-3100       Other Oil Colors Available
Click on Pic to Enlarge
Comfort Series Trail Saddle T-9004
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc., some at extra cost
Gullet Height: 8"
Swell: A-Fork; Width 10".
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless Steel.  Saddle strings cut from
premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Border Tooled with stems and turnbacks.

Special Price $
1,895.00     # T-9004
Comfort Series Trail Saddle Hand Engraved Tooling T-9716
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc, some at extra cost.
Weight: Approximately 29 lbs.
Gullet Height: 8"
Swell: A-Fork; Width 10". with Bucking Rolls
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Custom Conchos with Latigo Stringss, All Hardware including the saddle screws and washers is Stainless Steel.  Saddle strings cut from premium 5-7 oz.
burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use the Union Lockstitch to sew
and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Hand Tooled Carlos Boarder, Hand Engraved Floral

Special Price $ 2,
295.00     # T-9716
Click on Pic to Enlarge
Click on Pic to Enlarge
Southern Trails Reining Saddle # RN-9000
Tree: DL Reiner, rawhide covered and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer (tin seat). We shape this
leather to sit you comfortably in the saddle eliminating the need for all the fancy-named thick padding that many are using today to cover poor ground work.
Seat Size: Available in 15.5", 16" and 16.5".
Bars: Full Quarter Horse Bars 7" Gullet
Weight: Approximately 36 lbs.
Gullet Height:8"
Swell: Reiner; Width 13"
Skirts: Length 27"; Width 14", lined with genuine bark tan  1" thick wool shearlings, 1" density.
Cantle: Height 3"  Width  12½"; Dish 1 ¼"; Style 2½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¼", Diameter 2", leather covered, hand sewn.
Stirrup Leathers: 2½" with leather covered Blevins Buckles
Stirrups: Wooden metal bound leather covered, machine sewn bell stirrups with 3" treads.
Rigging: Double dee rigging in full position. Hardware is Stainless Steel.
Leather: 13-15 oz. Thoroughbred Golden, Mahogany, or Walnut Skirting.
Trim: Sterling Silver Overlay Conchos with tips. All Hardware including the saddle screws and washers is stainless steel.  We use the Union Lockstitch to sew and
pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Reiner  receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are burnished by hand rubbing.
Tooling: Hand carved floral with Hamley swirl.

Special Price $ 2,
495.00     # RN-9000
Comfort Series Trail Saddle - Square Skirt T-9400
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc., some at extra cost
Weight: Approximately 29 lbs.
Gullet Height: 8"
Swell: A-Fork; Width 10".
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless Steel.  Saddle strings cut from
premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Border Tooled with stems and turnbacks.

Special Price $ 1,
699.00     # T-9400
Click on Pic to Enlarge
T-8006L A-Fork Lady Wade Soft Seat
Tree: Batie Custom Reinforced Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16" Cushioned Bicycle Style
Weight: Approximately 33 lbs.
Gullet Width: 6.75" Quarter Horse Bars - Other Available
Gullet Height: 7 3/4"
Swell:  Width 10 ½"
Skirts: Length 26 ½"; Width 12", lined with faux shearling, 90% wool.
Cantle: Height 4"  Width  12 ½"; Dish 1 ½"; Style ½" Natural Rawhide Covered Pencil Roll, Hand Sewn.
Horn: Height 3", Diameter 3", rawhide tipped, leather covered, hand sewn with mule hide horn wrap.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Flank Cincha: 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 11-13 oz. Premium Thoroughbred Golden Skirting. Walnut and Mahogany Available
Trim: All Hardware including the saddle screws and washers is stainless steel.  Saddle strings cut from premium 7-8 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Saddle receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are burnished by hand
rubbing.
Tooling: Hand Tooled Basket with Barbed Wire Border

Special Price $ 2,
195.00     # T-8006L
Click on Pic to Enlarge
TR-7000 Training Saddle - No short cuts on this Trainer, Built to Train a Lot of Horses
Tree: HD Reiner -Wood with Fiberglass Covering for Strength.  The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer (tin seat). We
shape this leather to sit you comfortably in the saddle eliminating the need for all the fancy-named thick padding that many are using today to cover poor ground work.
Seat Size: Available in 15.5", 16" and 16.5".
Bars: Full Quarter Horse Bars - Other Available
Weight: Approximately 34 lbs.
Gullet Width: 7" - others available
Gullet Height:8"
Swell: Reiner; Width 13"
Skirts: Length 27"; Width 14", lined with faux  shearling 90%  wool.
Cantle: Height 3"  Width  12½"; Dish 1 ¼"; Style 2 ¼" Cheyenne Roll with overlay, Hand Sewn.
Horn: Height 2 ¼", Diameter 2", leather covered, hand sewn.
Stirrup Leathers: 2½" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads..
Rigging: Horseshoe Brand In-skirt rigging ring in 7/8's position. 3" Stainless Steel dees in rear.
Leather: 13-15 oz. Thoroughbred Golden Rough Out Leather.
Trim: Finished with leather rossettes and satinless steel screws and washers.  We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 1/2
stitches to the inch.
Finish: Rough-out

Special Price $ 1,
795.00     # TR-7000
Click on Pic to Enlarge
Comfort Series Secure Trail Saddle T-9010
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20
gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc., some at extra cost
Weight: Approximately 30 lbs.
Gullet Height: 7.5"
Swell: Swept Back 15" Wide Beartrap
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 5" or 4" ;  Width  13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll with Swirl, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless
Steel.  Saddle strings cut from premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell
foam covered with 4-5 oz. chap leather. We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½
stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather
Conditioner.
Tooling: Border Tooling, Barbed Wire Shown, others available

Special Price $
1,995.00     # T-9010
Click on Pic to Enlarge
Click on Pic to Enlarge
Comfort Series Trail Saddle with Hand Engraved Tooling T-9516
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17". Padded with Suede Covering
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc, some at extra cost.
Weight: Approximately 29 lbs.
Gullet Height: 7.5"
Swell: Trail; Width 13"
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Custom Conchos with Latigo Stringss, All Hardware including the saddle screws and washers is Stainless Steel.  Saddle strings cut from premium 5-7 oz.
burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use the Union Lockstitch to sew
and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Hand Tooled Carlos Boarder, Hand Engraved Floral

Special Price $ 2,
195.00     # T-9516
Comfort Series Trail Saddle T-1650
Tree: Trail Tree, made of Southern Yellow Pine covered in a single hand-laid layer of 6 oz fiberglass cloth. Manufactured exclusively for us by Steele Saddle
Tree LLC. The ground work is hand shaped using skirting leather over a 20 oz. saddle strainer (tin seat). We shape this leather to sit you comfortably in the
saddle just as we would if we were building a slick seat saddle.
Seat Size: Available in 15", 16", 17", and 18"
Bars: Offered in Full Quarter, QH, X- Wide, Mule, and Gaited
Weight: Approximately 29 lbs.
Gullet Height: 8"
Swell: Tall Swept Back; Width 13 ½".
Skirts: Length 25 ½" (on 16” seat); Width 12" at front and 10" at rear, lined with faux shearling, 90% wool.
Cantle: Height 5";  Width  12 ½"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 3", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Trail Stirrups with 4" treads.
Rigging: Solid Brass Plate Rig Hardware In-Skirt.
Leather: Available with 13-15 oz. Thoroughbred Dark Oil Antique Skirting. Other Colors available
Trim: Solid Brass Footman Loops with Tie Rings, All Hardware including the saddle screws and washers is Solid Brass.  Saddle strings cut from premium 5-7
oz. latigo. We use the Union Lockstitch to sew and pull the 277 nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Comfort Trail Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Horseshoe Brand Santa Fe Diamond with double cut lines on each side give this model just the right amount of border tooling.

Special Price $
1,895.00 # T-1650                       18" $ 1,995.00
Click on Pic to Enlarge
Ranch & Trail Saddle T-9450
A beefed-up version of the B-Light Trail Saddle, has a double covered fiberglass tree with a wade post horn. Comes with mule hide horn wrap, cross over rope Tree:
A beefed-up version of the B-Light Trail Tree, made of Southern Yellow Pine covered in a double hand-laid layer of 6 oz fiberglass cloth. Manufactured exclusively
for us by Steele Saddle Tree LLC. The ground work is hand shaped using skirting leather over a 20 oz. saddle strainer (tin seat).
Seat Size: Available in 15", 16" and 17".
Bars: Full Quarter Horse Bars; Reg QH, Semi-QH, Gaited, Mule are available
Weight: Approximately 35 lbs.
Gullet Width: 7" - others available
Gullet Height:8"
Swell: A-Fork; Width 10"
Skirts: Length 26" (on 16" seat); Width 11" at the front and 9" at rear, lined with faux shearling, 90% wool.
Cantle: Height 4"  Width  13"; Dish 1 ½"; Style 1½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 3", Leather covered, Hand Sewn, mule hide horn wrap.
Stirrup Leathers: 2½" with leather covered Blevins Buckles, machine sewn and copper riveted at the blevins buckle and the top of the fender.
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8's position. Hardware is Stainless Steel Horseshoe Brand with black inlay floral work.
Leather: 13-15 oz. Thoroughbred Golden, Mahogany, or Walnut Skirting.
Trim: Slotted Horseshoe Brand Conchos with black accents; all Hardware including the saddle screws and washers is stainless steel.  Saddle strings cut from
premium 5-7 oz. burgandy latigo. The bicycle padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use the Union Lockstitch
to sew and pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Ranch & Trail Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnished by hand rubbing.
Tooling: Border Tooled and Basket Stamped

Special Price $
1,995.00     # T-9450
Click on Pic to Enlarge
Click on Pic to Enlarge
B-5200 Barrel Saddle
Tree: Custom Barrel Racer, Reinforced Wood.  The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer.
Seat Size: Available in 14 ½", and 15 ½".
Weight: Approximately 28 lbs.
Gullet Width: 6 ½" SQH, 6.75", RQH, 7" FQH - Gullet Height 7.5"
Swell: Round Fork; Width 12".
Skirts: Length 25" (on 15 ½"seat), 24” on 14 ½" seat; Width 10 ½", lined with faux shearling, 90% wool.
Cantle: Height 4";  Width  11 ¼"; Dish 1 ¼"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 3 ¾", Diameter 1 ¾" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the
fenders
Stirrups: Off-set Aluminum
Rigging: Horseshoe Brand Flat Plate dropped in-skirt, 7/8’s position, 2 ½"  recessed beveled stainless steel dees in rear.
Leather: Premium 13-15 oz. Thoroughbred Golden Skirting.
Trim: Horseshoe Brand Floral Slotted  Conchos with black accents. All Hardware including the saddle screws and washers is Stainless Steel.  
12" mock saddle strings cut from premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam
covered with black ostrich print cowhide. We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to
the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: All done by Hand, Hamley swirl with barb wire border. - Other Styles available

Special Price $ 1
,695.00  # B-5200  ----------  Note: Other Color Oils Available
Secure Trail # T-9015
Tree: Custom Fiberglass Covered Wood
Seat Size: Available in 15", 16", and 17". The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc., some at extra cost
Weight: Approximately 34 lbs.
Gullet Height: 7.5"
Swell: Swept Back 15" Wide Beartrap
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 5" or 4" ;  Width  13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll with Silver Lacing
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal with 3" treads, Custom Tapedoros
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand. Rear 3 Piece Cinch is Standard
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless Steel.  
Saddle strings cut from premium 5-7 oz. burgundy latigo. We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at
5 ½ stitches to the inch.
Finish: Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Border Tooling with stems and turnbuckles, others available

Special Price $ 2,
395.00     # T-9015
Comfort Series Endurance Trail Saddle T-9756
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc., some at extra cost
Weight: Approximately 28 lbs.
Gullet Height: 8"
Swell: A-Fork; Width 10".
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style 1 ½" Pencil Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Endurance Style with 4" treads.
Rigging: In-Skirt plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless Steel.  Saddle strings cut from
premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Double Cut Line Border

Special Price $ 1,
699.00     # T-9756
Click on Pic to Enlarge
Click on Pics to Enlarge
Newest Models, descriptions coming soon, please ask for details and pricing
A-Fork Wade Style Hard Seat Trail Saddle # R-8016
Tree: Fiberglas Reinforced Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16"
Gullet Width: 6.75" Quarter Horse Bars - Others Available
Gullet Height: 7 3/4"
Swell:  Width 10 ½"
Skirts: Length 26 ½"; Width 12", lined with faux shearling, 90% wool.
Cantle: Height 4"  Width  12 ½"; Dish 1 ½"; Style ½" Natural Rawhide Covered Pencil Roll, Hand Sewn.
Horn: Height 3", Diameter 3", rawhide tipped, leather covered, hand sewn with mule hide horn wrap.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Flank Cincha: 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 13-15 oz. Premium Thoroughbred Walnut Skirting.
Trim: All Hardware including the saddle screws and washers is stainless steel.  Saddle strings cut from premium 7-8 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Working Rancher receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are burnished
by hand rubbing.
Tooling: Hand Tooled Basket with Barbed Wire Border
Special: Saddle Bag on one side and Tool Pouch on opposite side

Special Price $ 2,
495.00     # R-8016
Click on Pic to Enlarge
Click on Pic to Enlarge
Comfort Series Trail Saddle T-9550
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc., some at extra cost
Weight: Approximately 29 lbs.
Gullet Height: 7.5"
Swell: 12.5" Wide
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style 1 ½" Pencil Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: 2" Wood Bell with Tapedoros
Rigging: In-Skirt plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless Steel.  Saddle strings cut from
premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Double Cut Line Border

Special Price $
1,995.00     # T-9550
The Wanderer Ultimate Trail and Overnight Saddle # T-3100
Tree: Fiberglass covered Solid Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer (tin seat). We shape this leather to sit you
comfortably in the saddle eliminating the need for all the fancy-named thick padding that many are using today to cover poor ground work.
Seat Size: Available in 15 " and 16".
Bars: Quarter Horse Bars, others available
Weight: Approximately 42 lbs.
Gullet Width: 6 ¾", others avaiable
Gullet Height: 8 ½"
Swell: Round Fork; Width 12".
Skirts: Length 27" (on 16"seat); Width 12 ½", lined with faux shearling, 90% wool.
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style ½" Pencil Roll, Hand Sewn.
Horn: Solid Bronze by Boise Foundry; Height 3", Diameter 3" Leather covered, Hand Sewn.
Stirrup Leathers: 3" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Brass Bound Wooden 2 ½" Visialia with Half Covers.
Rigging: Double Dee in 7/8's position, Solid Brass Dees.
Leather: 13-15 oz. Golden Skirting.
Trim: The Saddle comes with 8 ½" X 9" made on the back jockeys (not removable). All Hardware including the saddle screws and washers is Solid Brass.  Saddle
strings on this eight string set hang 36" from the rear button, 18" from the seat buttons, and 24" from the front button.  We use the Union Lockstitch to sew and pull
the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each  Saddle first receives several warm coats of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Running W Border with shell on each side.

Special Price $ 3,
395.00                    # T-3100
Click on Pic to Enlarge